Dahua PFA-130 Box

Hi, I’d like to present my design for a junction box for mounting DAHUA cameras. I based it on the PFA-130 type boxes, which fit perfectly with the new series of Dahua cameras. The box has mounting holes arranged on a Ø84mm circle, but upon request from other users, I can also prepare variants for Ø70mm and Ø68.5mm. In my setup, I routed a Cat.5e F/UTP cable through the side of the box by gently drilling a Ø6mm hole. For installation, I recommend using wood screws (self-tapping screws for plastics also work) sized 3.5x12/15/16mm to fasten the camera base to the box, and 3.5x25mm screws to connect the two parts of the box (top to bottom).To mount the box to its final location, I recommend using 3.5mm screws with a length of at least 15mm.This junction box has already been tested with the following cameras:IPC-HDW3849H-AS-PV-0280B-PRO – a large and heavy camera, holds perfectly.IPC-HDW2849TM-S-IL-0280B – a classic camera, also fits and stays stable.I recommend printing with at least PET-