Dancer in smoke Hueforge

5 colours . 1 pause enabled to change fillament in Ams . I changed black to white .Have fun! Project: Dancer with smoke.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 144.44x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA+ Esun Orange Transmission Distance: 5 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Blue At layer #14 (1.2mm) swap to Orange At layer #18 (1.52mm) swap to Bone White At layer #21 (1.76mm) swap to Jade White for the rest.