DanDaDan Collection Hueforge

Another DanDaDan Hueforge with a different style, like a ballpoint pen drawing! Print Instruction:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150.2mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm Filaments Used: #080a0d PLA Black Transmission Distance: 0.1 #c00d1e PLA Basic Red Transmission Distance: 4 #ffffff PLA Basic Jade White Transmission Distance: 5 #7900b6 PLA Purple Transmission Distance: 2.5 #0000ff PLA Blue Transmission Distance: 1.6This print uses 5 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #10 (0.88mm) swap to Jade White At layer #12 (1.04mm) swap to Purple At layer #14 (1.2mm) swap to Blue At layer #17 (1.44mm) swap to Jade White for the rest. For only One AMS,Start with 4 colors as follows:Slot1: BlackSlot2: RedSlot3: WhiteSlot4: PurplePause was set at Layer #7 in the