DanDaDan Evil Eye Bookmark

More DanDaDan available Evil Eye BookmarkPictures shown are printed in an 0.2mm NozzlePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Purple Transmission Distance: 3.6 PLA BambuLab Basic Magenta Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer (0.96mm) swap to Purple At layer (1.2mm) swap to Magenta At layer (1.36mm) swap to Jade White for the rest. Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge