Dandadan Hueforge

Dandadan HueforgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 129.44x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 4mm and the Actual Depth is 2.7mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Blue Gray At layer #19 (1.6mm) swap to Ivory White for the rest.