Thingiverse
D&D spell slot tracker
von mikeymakesit
256
Downloads
157
Likes
3
Makes
This spell tracker is intended to help you manage your spell slots while playing. Instead of marking on paper each time you consume spell slots, just roll down the relevant 12mm die and remove it when you have no slots left. After a short or long rest, reset your slots to what your current level allows.
The trackers are meant to be in an Altoids or similar tin. In my photos I'm using an [Ice Chips](https://www.icechips.com/) tin. The lid shuts with the dice in place. You can choose to glue down the insert inside the tin or leave it loose. To put your insert into your tin, slide one short end in first, then push it to the bottom and the other end will fit in with a small amount of force. The insert is loose in the tin; you can leave it loose to remove later or you can glue it in place.
I modeled this around [12mm Chessex dice](http://www.chessex.com/) which measure in at 12.2 mm with radiused edges. I hope it works for other 12mm dice too.
This is my second attempt at a
The trackers are meant to be in an Altoids or similar tin. In my photos I'm using an [Ice Chips](https://www.icechips.com/) tin. The lid shuts with the dice in place. You can choose to glue down the insert inside the tin or leave it loose. To put your insert into your tin, slide one short end in first, then push it to the bottom and the other end will fit in with a small amount of force. The insert is loose in the tin; you can leave it loose to remove later or you can glue it in place.
I modeled this around [12mm Chessex dice](http://www.chessex.com/) which measure in at 12.2 mm with radiused edges. I hope it works for other 12mm dice too.
This is my second attempt at a
mikeymakesit veröffentlicht auch auf
76 zusätzliche Modelle auf 3 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
