Darkwing Duck HueForge

Project: DarkwingHUE.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 158.29x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Tough Lavender Blue Transmission Distance: 2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Jessie Premium Purple Ice Transmission Distance: 18 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #11 (0.96mm) swap to Lavender Blue At layer #16 (1.36mm) swap to Blue Gray At layer #17 (1.44mm) swap to Purple Ice At layer #19 (1.6mm) swap to Grey At layer #20 (1.68mm) swap to Yellow At layer #26 (2.16mm