Darth Vader – Art Panel

Design created using HueForge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 400x400mm in size however it is split into 4 lots of 200x200mmYou may print at higher layer heights below the Base Thickness of 0.4mmThe Max allowed Thickness is 1.92mm and the Actual Thickness is 1.84mm The colours used are:Sunlu Basic Black Transmission Distance: 0.1Sunlu Matte White Transmission Distance: 3.9Bambu Matte Scarlet Red Transmission Distance: 1.7Sunlu Basic Sunny Orange Transmission Distance: 2.9 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Matte White At layer #10 (0.88mm) swap to Scarlet Red At layer #13 (1.12mm) swap to Sunny Orange At layer #14 (1.2mm) swap to Scarlet Red At layer #16 (1.36mm) swap to Matte White At layer #19 (1.6mm) swap to Sunny Orange At layer #22 (1.84mm) swap to Matte White for the rest. NOTE: The frame used is NOT included, as it is NOT my own. Please find the frame here - The Ultimate HueForge Frame | Fu