Darth Vader - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.16mmThe Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used:PLA Smart Materials Black Transmission Distance: 0.8PLA eSUN Blue Gray Transmission Distance: 0.6PLA Smart Materials Red Transmission Distance: 1.2PLA Smart Materials White Transmission Distance: 6.8This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #3 (0.32mm) swap to Blue GrayAt layer #10 (0.88mm) swap to RedAt layer #17 (1.44mm) swap to WhiteAt layer #34 (2.8mm) swap to Red for the rest. Boost MeIf you like it, remember to hit the like and boost button. ------------------------------------------------------------------------------------------------------------------------------------------------------- Impresión al 100% de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mm.El modelo tiene un tamaño d