Darth Vader - Samurai

Original Artwork: TAKUMI Designed for the Celebration of Star Wars - Japan 2025 This design required the 0.2mm nozzle. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 105.03x150mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.1mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #11 (0.96mm) swap to Red for the rest.