Dashcam Mount

The stock suction mount for my dashcam kept falling down and I couldn't find a different mount that I likd. I liked the idea of mounting it just under my rearview mirror so I made a mount that can use the same screw hole that holds the mirror.

I based my design on the stock mount so I could reuse the camera attachment and adjustment screw; the only thing I didn't use was the suction piece.

The stock screw for my rearview mirror wasn't very long so I had to get a longer one. I used a button head, #10-24 x 1/2" screw (Imperial) with a hex-key head (doesn't have to be Torx like your car).

I don't know if my screw has the same thread size as yours, so check your car's mirror screw to make sure you get the right thread size and measure to get a screw long enough to remount your mirror.
Here's a good guide to figuring out what thread size you need.
https://www.wikihow.com/Measure-Thread

After printing, you'll need to glue the arms to the stem piece (did this so that the arms c