Deadpool and Wolverine (hueforge)

Deadpool with Lady Deadpool Wall Art. (hueforge). This is a 4 Color Print. See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm The Model is 176.32x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm (if you are using my print profile, I have set the bottom layers to print thicker, this saves about an hour+ off the time. all the other layers are at 0.04mm). Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #