Deadpool and Wolverine

Multicolor_Deadpool and Volwerine Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.45mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: Black Transmission Distance: 0.3 Red Transmission Distance: 4 Yellow Transmission Distance: 6 Metallic Silver Transmission Distance: 0.5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (