Deadpool Dogpool HueForge- No Background

Dogpool Hueforge! I use AMS lite for the print, 7 colors in total, and separate into 3 plates( Face, Cloth, Tongue). Need to glue parts together!AMS are not required, but easier for the printing process.If no AMS, then have to change filament manually, following the description below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 156.88x170mm in size Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Matte Scarlet Red Transmission Distance: 2PLA esun Matte Strawberry Red Transmission Distance: 3PLA BambuLab Matte Ash Gray Transmission Distance: 1.5PLA BambuLab Matte Ivory White Transmission Distance: 3.5PLA BambuLab Matte Dark Brown Transmission Distance: 1PLA BambuLab Matte Latte Brown Transmission Distance: 2 Plate 01- Face( 5 colors, Black, Dark Brown, Light Brown, Gray, White)Swap Instructions:Start with CharcoalAt layer #11 (0.96mm) swap to Dark BrownAt layer #17 (1.44mm) swap to Ash GrayAt layer #22 (1.84