Deadpool vs Wolverine - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 99.03x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:S