Deadpool/Wolverine

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Bambu Labs Basic Cyan Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA Inland Yellow Transmission Distance: 5.4 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Cyan At layer #11 (0.96mm) swap to Jade White At layer #12 (1.04mm) swap to Black At layer #13 (1.12mm) swap to Dark Red At layer #15 (1.28mm) swap to Beige At layer #18 (1.52mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White At layer #23 (1.92mm) swap to Black At layer #24 (2mm) swap to Jade White for the rest.