Death Battle Hueforge

Project: death battle.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.19mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Default Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5 PLA PolyLite Grey Transmission Distance: 1 PLA Default White Transmission Distance: 5 PLA BambuLab Basic Blue Gray Transmission Distance: 3This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (1.16mm) swap to purple At layer #8 (1.32mm) swap to White At layer #10 (1.64mm) swap to yellow At layer #12 (1.96mm) swap to black At layer #13 (2mm) swap to yellow for the rest.