Thingiverse
Death Egg
por Coat
70
Descargas
38
Likes
0
Makes
A weapon for Darth Bunny.
Of course all the credits goes to Plainolddave (https://www.thingiverse.com/thing:117733).
I scaled the Z for the bottom with 115%, the ring in the middle with 150% and the Z for the top with 140%.
The X and Y are the same as the original.
All the parts are in the same STL.
Print it at about 43% for chicken-egg-size (60 mm)
Happy egging :)
I printed it at 60% and with 15% infill, no support
if you have bad bed adhesion, print the location pins separately with a brim, altough you don't really need those pins.
Of course all the credits goes to Plainolddave (https://www.thingiverse.com/thing:117733).
I scaled the Z for the bottom with 115%, the ring in the middle with 150% and the Z for the top with 140%.
The X and Y are the same as the original.
All the parts are in the same STL.
Print it at about 43% for chicken-egg-size (60 mm)
Happy egging :)
I printed it at 60% and with 15% infill, no support
if you have bad bed adhesion, print the location pins separately with a brim, altough you don't really need those pins.
Coat también publica en
73 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
![Christmas Death Star with Star Destroyers [updated]](/imgproxy.php?url=https%3A%2F%2Fmedia.printables.com%2Fmedia%2Fprints%2F1094427%2Fimages%2F8275006_e22b69a3-4684-41a9-a4eb-9657efc12f39_4d9bfe76-9a1f-4692-972c-6a2d5f69f210%2Fstar3.png&w=400&h=300)
