Death on his Throne

Model Description This highly detailed Grim Reaper throne model is designed as a premium display piece featuring intricate gothic architecture, skulls, flowing robes, a detailed scythe, and numerous decorative overhangs. The model contains many unsupported features that require proper support generation to preserve detail and prevent print failures. Recommended Print Settings Material Silk Copper PLA Nozzle Temperature: 210–220°C Bed Temperature: 55–60°C Layer Height 0.12mm (Best Detail) 0.16mm (Balanced Speed and Quality) Nozzle 0.4mm Walls 3–4 Perimeters Top Layers 5–6 Bottom Layers 5–6 Infill 10–15% Gyroid 15–20% Cubic (Optional) Print Speed Outer Walls: 30–40 mm/s Inner Walls: 50 mm/s Infill: 60 mm/s ⚠️ TREE SUPPORTS ARE REQUIRED ⚠️ IMPORTANT This model should NOT be printed without supports. Due to: The scythe blade Hood overhangs Hanging cloak details Skull decorations Throne spires Arm and hand positioning Under-throne cavities Gothic arches Tree Supports must be enabled for the entire model. Traditional supports can: Damage fine details Leave large support scars Be difficult to remove Increase filament usage significantly Tree Supports provide: Better surface quality Easier removal Less material usage Superior support for organic shapes Tree Support Settings For Bambu Studio / Orca Slicer Support Type: Tree Style: Organic Placement: Everywhere Threshold Angle: 45° Branch Density: 10–15% Branch Diameter: 3–4mm Tree Branch Distance: 1–2mm Support Interface: Enabled Interface Layers: 3 For Cura Generate Support: ON Support Structure: Tree Placement: Everywhere Support Overhang Angle: 45° Tree Branch Angle: 40° Tree Branch Distance: 1–2mm Tree Support Collision Resolution: Enabled Orientation Print Upright As Modeled ✅ Recommended: Throne flat on build plate Reaper facing forward ❌ Do Not: Lay on back Lay on side Angle the model Printing upright preserves: Throne details Skull features Robe texture Scythe detail Gothic architecture Build Plate Adhesion Brim: 8–1