Thingiverse
DEC PDP-11 keyring keyfob
door 1944GPW
23
Downloads
19
Likes
1
Makes
A fun little tribute to one of the most popular and influential range of computers in history.
Key fob size is 60mm long x 30mm wide x 4mm thick (2-3/8" x 1-1/8" x 5/32").
This thing didn't take long to create. I already had the DXF's from the CAD artwork for a recreation of the d|i|g|i|t|a|l masthead for the H960 rack (a work in progress) so I simply used a fragment of that drawing as two DXF's here.
The outer part of the keyring fob is white and the inner letters printed in magenta (actually more rose-coloured) filament from a 20-something colour sample pack I found on eBay.
I was planning to superglue them in but all that was required was to use an Exacto #11 blade to slightly bevel the rear edges of the letters before press-fitting them in, clamped between two clean pieces of wood in a vise. No glue was needed.
There is a solid version with no internal lettering pieces if you prefer that design. No support or raft is needed for any piece but definitely use 100% infill
Key fob size is 60mm long x 30mm wide x 4mm thick (2-3/8" x 1-1/8" x 5/32").
This thing didn't take long to create. I already had the DXF's from the CAD artwork for a recreation of the d|i|g|i|t|a|l masthead for the H960 rack (a work in progress) so I simply used a fragment of that drawing as two DXF's here.
The outer part of the keyring fob is white and the inner letters printed in magenta (actually more rose-coloured) filament from a 20-something colour sample pack I found on eBay.
I was planning to superglue them in but all that was required was to use an Exacto #11 blade to slightly bevel the rear edges of the letters before press-fitting them in, clamped between two clean pieces of wood in a vise. No glue was needed.
There is a solid version with no internal lettering pieces if you prefer that design. No support or raft is needed for any piece but definitely use 100% infill
1944GPW publiceert ook op
26 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!