Thingiverse
Decorative lamp
von KriptonCG
25
Downloads
116
Likes
0
Makes
Decorative lamp. More lamps and my other models here: https://t.me/print_3d_fdm
The base is mounted on a 23mm pipe; M4 bushings are melted into the holes in the legs, or a nut is used. The bottom, with a socket for an E14 socket, is screwed to the base with M4 bolts. The grilles are glued together and then glued to the bottom. The top cover simply rests on dowels. For outdoor placement, weather protection should be cut from thin plexiglass (4 pieces, 82mm by 154mm), or printed from transparent PETG in vase mode (file "Protection").
The base is mounted on a 23mm pipe; M4 bushings are melted into the holes in the legs, or a nut is used. The bottom, with a socket for an E14 socket, is screwed to the base with M4 bolts. The grilles are glued together and then glued to the bottom. The top cover simply rests on dowels. For outdoor placement, weather protection should be cut from thin plexiglass (4 pieces, 82mm by 154mm), or printed from transparent PETG in vase mode (file "Protection").
KriptonCG veröffentlicht auch auf
10 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
