DeepDeck case with space for battery

Case for the DeepDeck macro keyboard. Made with a compartment for a 3.7V lithium 3300mah battery measuring 6.9x57.5x78mm (search for LP675776). The connector on the DeepDeck is a 2 pin 2mm JST - make sure the polarity of the battery connector matches the ones printed on the board red goes to + and black to -. There is an integrated opening for the gesture sensor, also check my other model for a holder for the gesture sensor: https://makerworld.com/sv/models/794036-oled-gesture-sensor-holder-for-deepdeckAlso included are custom knobs for the encoders to let you match the color of the printed case. Check out @taivlam's nice blue color combo in the comments! =) The heat inserts and socket cap head screws are of other branding, but the ones are the same dimensions. The heat inserts go in the top side of the case and the screws go in from the bottom. Be careful to press in the heat inserts straight. There is very little wiggle room for the screws to go in at an angle.Make sure you have