Defog fitting for goggles (airsoft)

If you have one you know which brand this is from. I had to make this because the magnet bracket kept breaking (considering how thin it is, it's no wonder). They don't sell parts so I made a replacement. I'm sure others who have this have had similar issues so this is for you.

The original magnets fit in this 3D model. If you don't have them then the magnet size is 4mm diameter x 2mm thickness (make sure to get the polarities correct before gluing them - I added push through holes incase you need to pop them out for this reason).

The angle on mine is different from the original because to match the original the bracket would be way to thin. So since I had to change the angle on the bracket I had to make a new nozzle to match.

There are two variations for the nozzle. If your printer can manage the overhang then you can print it as one piece.

If your printer needs supports to do the overhang I've broken it up into two parts so you can have access to the inside to remove the suppo