Delightful Bumblebee Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 63.44x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.7mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA Hatchbox Purple Transmission Distance: 2.6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to BambuLab Green At layer #8 (0.72mm) swap to Purple At layer #10 (0.88mm) swap to Orange At layer #14 (1.2mm) swap to Yellow for the rest.