Thingiverse
Delta 3D "Planter"
door KENKEN0851
229
Downloads
575
Likes
1
Makes
Enjoy getting your plants 'printed'!
When water is poured into the upper tray, water is fed through a Teflon tube into the extruder (pot). The water is further fed through nozzles to the build plate (lower tray). By passing the yarn through the nozzle, capillary action causes the water to rise, keeping the soil inside the extruder moist.
Please refer to the three-page instructions for assembly.
Almost all components are 3D data, but you will need to provide a Teflon tube with an outer diameter of 4 mm and wool yarn.
*Upper tray is recommended to be printed upside down with support.
When water is poured into the upper tray, water is fed through a Teflon tube into the extruder (pot). The water is further fed through nozzles to the build plate (lower tray). By passing the yarn through the nozzle, capillary action causes the water to rise, keeping the soil inside the extruder moist.
Please refer to the three-page instructions for assembly.
Almost all components are 3D data, but you will need to provide a Teflon tube with an outer diameter of 4 mm and wool yarn.
*Upper tray is recommended to be printed upside down with support.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
