Thingiverse
Delta Extruder Assembly
2
Descargas
1
Likes
0
Makes
This is a delta extruder assembly designed with the following in mind:
1. Maximize z height. This means mount the rods as close to the tip of the nozzle as possible. The downside of this is one-at-a-time prints will have to spaced out more.
2. Auto-bed level compatible. It is critically designed to minimize the distance between the nozzle and the touch leveler (triangle lab model). To achieve this, the ABL device is actually mounted at a 45 degree angle so that when extended it is only 3mm from the extruder. Delta printers are EXTREMELY SENSITIVE to any effector tilt, so this is really the only way to leverage a bl touch (unless you can achieve some pretty exotic tolerances with your build). Even mounted this close, you will need to ensure the effector is extremly level. So far, using the bltouch at an angle has not been an issue for me, but your mileage may vary depending on your build plate material.
3. Easy assembly. You simple thread a M3 60mm rod through each side, add a
1. Maximize z height. This means mount the rods as close to the tip of the nozzle as possible. The downside of this is one-at-a-time prints will have to spaced out more.
2. Auto-bed level compatible. It is critically designed to minimize the distance between the nozzle and the touch leveler (triangle lab model). To achieve this, the ABL device is actually mounted at a 45 degree angle so that when extended it is only 3mm from the extruder. Delta printers are EXTREMELY SENSITIVE to any effector tilt, so this is really the only way to leverage a bl touch (unless you can achieve some pretty exotic tolerances with your build). Even mounted this close, you will need to ensure the effector is extremly level. So far, using the bltouch at an angle has not been an issue for me, but your mileage may vary depending on your build plate material.
3. Easy assembly. You simple thread a M3 60mm rod through each side, add a
CartesianTheatrics también publica en
4 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
