Demon Slayer Hufeforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO Gray Transmission Distance: 2.5 PETG JAYO White Transmission Distance: 6Swap Instructions: Start with Black At layer #8 (0.76mm) swap to Gray At layer #10 (0.92mm) swap to Gray At layer #13 (1.16mm) swap to White for the rest.