demon slayer

Project: Demon Slayer GIrlPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x279.87mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Kexcelled Purple Transmission Distance: 0.6 PLA Kexcelled Fluorescent Red Transmission Distance: 2.6 PETG JAYO White Transmission Distance: 6This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #7 (0.64mm) swap to fluorescent Red At layer #8 (0.72mm) swap to Purple At layer #12 (1.04mm) swap to White for the rest.