Demon Slayer - Zenitsu Hueforge

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail, souhaitez vendre mes créations ou trouver des modèles exclusifs venez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff831e PLA Forshape Orange Transmission Distance: 6.3 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to Orange At layer #21 (1.76mm) swap to Sunflower Yellow At layer #26 (2.16mm) swap to White for the rest.