Demon Succub Hueforge

Link to my collection of works Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.88mm The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm Filaments Used: (* = Owned) #ffffff * PETG GERG White(белый) Transmission Distance: 4.7 #4c5f71 * PETG FDplast blue grey Transmission Distance: 3 #93a3a4 * PETG FDplast Light grey(светло серый) Transmission Distance: 0.8 #000000 * PETG GREG Black(черный) Transmission Distance: 1.4 This print uses 4 unique filaments Swap Instructions: Start with White(белый) At layer #13 (1.2mm) swap to blue grey At layer #14 (1.28mm) swap to Light grey(светло серый) At layer #15 (1.36mm) swap to Black(черный) for the rest.