Denver

Project: Scheletro natalizio.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 83.33x125mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.4mm and the Actual Depth is 1.3mmFilaments Used: PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Scarlet Red At layer #8 (0.72mm) swap to Charcoal At layer #10 (0.88mm) swap to Dark Brown At layer #11 (0.96mm) swap to Ivory White for the rest.