I saw other ones on thingiverse but I wanted to make sure it would fit my desk The desk is 34mm/1.339".. When I finished the design I put it in cura and it was to big I could have printed it with supports a whole almost 8 hours. I split the model and tweaked it to have a dove tail and here it is.
What you need to print this:IntermediateMedium confidence
Why?
supports needed
Single pieceSupports required
Supports2/3
Assembly0/3
Settings1/3
Bed size0/3
Post-process0/3
Printer
FDM / FFF
File format
STL
Material
Est. print time
8 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Desk headphone mount need supports when printing?
Yes, Desk headphone mount will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
How long does it take to print Desk headphone mount?
According to the design notes, Desk headphone mount takes approximately 8 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Desk headphone mount available in?
Desk headphone mount is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Desk headphone mount free to download?
Yes, Desk headphone mount is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
Did you print this model? Sign in and share your make!
Thingiverse
