Desk Lamp (LED)

I was looking for a nice desk lamp but couldn't find one quickly. I still had LED panels, proximity switches and some USB cables lying around, so I designed something myself. Led source is a Micro Usb 5730 Led Panel 5V.I removed the micro-usb connection and soldered a cable directly to the board.The cable is routed through the middle arm.In the base I made a cut-out for a proximity switch. (see image below)In the base there is a hole in the front, so putting your hand in front of the base turns the lamp on or off.For the USB cable I just took an "old" cable and cut the micro-usb connection side.Because the led panel becomes slightly hot, I made air vents in the head to cool by natural convection. Printing:I printed all with 0.4 nozzle and 0.2 layer height. Advise is to use a structured plate for the bed.I created the different bands of color by changing colors at different heights. Colors used are PLA - Mystic Brown (A) and PLA - Blend Viva la Bronze (B).Color changes:Start