MakerWorld

Organizers

Desk organizer

by renova · Organizers

35 Downloads

7 Likes

2 Makes

Printed with Bambu Lab P1SPLA 0.2mm layer / PETG 0.2mm layer15% infill2 perimeters ~ 6.5 hours~ 190 g Can be printed in one piece without supports. Was created for my kids' desk Appreciate for any support

table desk deskorganiser deskorganizer desk accessories desk accessory organization

Category

Organizers

Source

MakerWorld

Published

24.02.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

print-in-place design · no supports · 0.20mm layers

Support-free Print-in-place

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG

Layer height

0.2 mm

Est. print time

6.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Desk organizer need supports when printing?

Nope — Desk organizer is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Desk organizer?

According to the design notes, Desk organizer takes approximately 6.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Desk organizer available in?

Desk organizer is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Desk organizer free to download?

Yes, Desk organizer is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Desk organizer

Similar Models

Add to Collection