Desk Riser for Ikea Alex drawers

Desk Riser for Ikea Alex drawers, Boosts height by 60mm. I made this desk riser as I wanted to raise the desk whilst still keeping the space underneath usable and looking as original as possible. This model goes round the whole perimeter of the draws and I beefed it up at the back to help take the weight of a PC and monitor. Each Riser is comprised of 7 pieces, helt together with 3D printed pins that lock the pieces in place. I used a thin double sided tape on the back pieces to prevent the desk from shifting if nudged. Printing tips Quantities: 2x Part 1, 2x Part 2, 2x Part3, 1x Part 4, 16x Part 5 5 Walls 20% Gyroid infill 0.2 Layer Height Printed in PLA+ Pins may need scaling up depending on how good your printer is (I'm using an old ender3). Increase walls and infill if you need it to be very strong though I was able to sit on the desk no issue with these settings. I would also advise buying all your filament beforehand as I found sunlu changed the colour of their white pla when