Detolf Shelf Bracket - No Hardware Needed

These are clip-in spacers for the Ikea Detolf glass curio cabinet. They are designed to snap onto the metal vertical rails with no tools or fasteners needed and are sized to divide each shelf level in half (190mm / ~7.5in.) with no measuring required. If using factory sized glass shelves, the tabs at the top will center the shelf front to back and hold it snug. If you have aftermarket (larger) extra shelves you can flip the spacer upside down and use the tab side towards the factory glass and the bare side towards the aftermarket shelf.

Designed to print vertically with no supports. Print 12 to fully double the number of evenly spaced shelves in your cabinet. On an Ender 3/5, you could easily fit 48 or more in one go if you have several of these cabinets to update. Casual printing speed is 1hr 40min per clip on an Ender 5 Pro w/ 5% infill w/ eSUN PLA+. YMMV.

I have had no issues supporting several pounds on each shelf with these clips. Be smart and use good judgement. I