DFRobot CM4 Mini Router Board V1 Case

DFRobot Mini Router V1 + CM4 Case
==============================

This is a minimalist case I designed for the DFRobot Mini IoT Router Board V1 that utilizes the Raspberry Pi CM4 board. I wanted a case that was clean and simple but still provided full functionality.

Features:
------------
+Openings for Power, USB, Dual Ethernet NIC, reset switch, and SD card.
+Labels for all ports
+Scalloped openings for easy connector seating
+Screw Mount holes with standoffs (clearance for heatsinks on CM4)
+Honeycomb style ventilation.
+Snap fit lid

No Supports needed. Very easy print. Files oriented correctly for print. Print at 5% infill and still very strong.

I used (4) M3 x 6mm screws for board mounting. The boards technically call for M2.5 screws, but you can make it work with M3.

I hope this print is helpful! I was not able to find a case for this setup that I liked so let me know if you like it. Also let me know if you have any issues! Tips always appreciated!