Thingiverse
Dice Mold Cup
by T_Bennett
81
Downloads
56
Likes
0
Makes
A 90mm diameter wide by 43mm tall cup. Intended for pouring cap style silicone molds for epoxy resin gaming dice.
The cup and base are printed separately for ease of securing mold masters to the base, as well as ease of cup separation from mold. Secure the base to the bottom of the cup with hot glue, completely sealing any gaps, before pouring silicone.
The Dice Mold Lid Cup is intended to be used to form a rim when pouring the mold cap. I recommend applying vaseline to the mold base diameter, then sliding the lid cup over it.
See this video for more information about cap style dice molds: https://youtu.be/5BDVUe5osUM
I had good results using a 0.4mm nozzle, 20% infill, and printing the cup with the lugs on the bed. Use supports as in picture 2.
The cup and base are printed separately for ease of securing mold masters to the base, as well as ease of cup separation from mold. Secure the base to the bottom of the cup with hot glue, completely sealing any gaps, before pouring silicone.
The Dice Mold Lid Cup is intended to be used to form a rim when pouring the mold cap. I recommend applying vaseline to the mold base diameter, then sliding the lid cup over it.
See this video for more information about cap style dice molds: https://youtu.be/5BDVUe5osUM
I had good results using a 0.4mm nozzle, 20% infill, and printing the cup with the lugs on the bed. Use supports as in picture 2.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!