Thingiverse
Diffuser Clamp compatible with Tolomeo MICRO - LED
door jcpcvg
0
Downloads
0
Likes
0
Makes
My diffuser clamp resin part broke but the aluminium part is still usable... I designed a 3d printable clamp.
TO BE USED ONLY WITH LED LIGHT BULBS - USE AT YOUR OWN RISK !!
PRINT ONLY WITH HIGH TEMP FIRE RETARDANT MATERIALS (POSSIBLY U/L RATED),
such as PC-FR or Onyx FR etc...
You will need
2x DIN 7340 type B brass Rivets ⌀ 4mm x 8mm and a suitable button/rivets setting tool.
1x M2x4.0mm Threaded Brass Insert
1x M2x12mm Screw
Be careful not to lose all the washers and springs in the assembly when you drill out the old eyelets.
TO BE USED ONLY WITH LED LIGHT BULBS - USE AT YOUR OWN RISK !!
PRINT ONLY WITH HIGH TEMP FIRE RETARDANT MATERIALS (POSSIBLY U/L RATED),
such as PC-FR or Onyx FR etc...
You will need
2x DIN 7340 type B brass Rivets ⌀ 4mm x 8mm and a suitable button/rivets setting tool.
1x M2x4.0mm Threaded Brass Insert
1x M2x12mm Screw
Be careful not to lose all the washers and springs in the assembly when you drill out the old eyelets.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
