Thingiverse
Diffuser for Canon MT-24EX twin flash
por thenickdude
69
Descargas
59
Likes
0
Makes
This diffuser clips on to the front of your Canon MT-24EX flashheads and provides a large, evenly illuminated 175x120mm rectangular front face (~7x5 inches). The shape of the face has been chosen so that the MT-24EX's natural beam pattern completely covers it.
The focusing lamp still works but is probably no longer bright enough to be useful for anything.
Print using white PLA with 0.2mm layer height, 2 perimeters, no supports, and infill doesn't matter. Set the seam position to "random" to avoid the layer change scar lining up and causing a weakness in the wall.
The 0.2mm front face is problematic because if it is printed as a single 0.2mm layer, any underextrusion or lack of squish here will cause the diffuser face to split along the direction of the extrusion lines when pressure is applied to it.
**Instead you want to print this bottom face as two 0.1mm layers.** This way the second layer (which is oriented at 90 degrees) will prevent this splitting.
With [PrusaSlic
The focusing lamp still works but is probably no longer bright enough to be useful for anything.
Print using white PLA with 0.2mm layer height, 2 perimeters, no supports, and infill doesn't matter. Set the seam position to "random" to avoid the layer change scar lining up and causing a weakness in the wall.
The 0.2mm front face is problematic because if it is printed as a single 0.2mm layer, any underextrusion or lack of squish here will cause the diffuser face to split along the direction of the extrusion lines when pressure is applied to it.
**Instead you want to print this bottom face as two 0.1mm layers.** This way the second layer (which is oriented at 90 degrees) will prevent this splitting.
With [PrusaSlic
thenickdude también publica en
36 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
