Thingiverse
Digital dial gauge data jack
door snowfaerie
4
Downloads
2
Likes
0
Makes
***You wouldn't download a data jack...***
Remix of https://www.thingiverse.com/thing:2155073 made to better fit my particular dial gauge, in this case a Neotek 0-25.4mm/1" 0.01mm/0.0005"
I made the following changes:
* Removed the nut and bolt strain relief.
* Shortened the insertable length, as the original length caused shorts in my gauge when fully inserted.
* Shortened the jack slightly.
* Deepened the front holes slightly, as I find that makes it easier to keep the wires inserted while bending them.
I used CAT 5E cable with a solid core, 0.5mm diameter stripped. You will also need some kind of glue to fix the cables in place and prevent the pins from being bent. I used Starbond DW-500 (cyanoacrylate) with CA accelerator, which works very well for this kind of thing.
Remix of https://www.thingiverse.com/thing:2155073 made to better fit my particular dial gauge, in this case a Neotek 0-25.4mm/1" 0.01mm/0.0005"
I made the following changes:
* Removed the nut and bolt strain relief.
* Shortened the insertable length, as the original length caused shorts in my gauge when fully inserted.
* Shortened the jack slightly.
* Deepened the front holes slightly, as I find that makes it easier to keep the wires inserted while bending them.
I used CAT 5E cable with a solid core, 0.5mm diameter stripped. You will also need some kind of glue to fix the cables in place and prevent the pins from being bent. I used Starbond DW-500 (cyanoacrylate) with CA accelerator, which works very well for this kind of thing.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!