Thingiverse
DIN14 Plug
by TzOk
19
Downloads
9
Likes
0
Makes
This is a complete replacement for DIN14 plug used in Atari ST, Atari PC and Amstrad PC1512 & PC1640 computers. Almost impossible to buy today. Pin diameter should be 1,25 mm. Matching pins are DEGSON DG333J-3,5 or PTR STL1350-3.5-V. Screw is 1.2x5 or 2x5.
Pins source: https://www.conrad.com/p/ptr-pin-strip-precision-no-of-rows-1-pins-per-row-7-51350075001g-1-pcs-732191 (you will need 2 of these for 1 plug).
DIN14 Assembly.stl is only for reference.
DIN14 Base + DIN14 Shell Shroud Long + DIN14 Grip long is an optimal set for 3D printing.
There is also a "pinholder" thing, which is what its name says - it is a tool that makes it easier to push the pins into the pin base.
I've added a shrouded shell version, and a version with a longer joint between shell and grip.
The "shroud" and "grip" bodies height are a compromise between rigidity and ability to print multiple parts at once on Ender-3 in "one at a time" mode, which limits the height of the element to ~28 mm (gantry
Pins source: https://www.conrad.com/p/ptr-pin-strip-precision-no-of-rows-1-pins-per-row-7-51350075001g-1-pcs-732191 (you will need 2 of these for 1 plug).
DIN14 Assembly.stl is only for reference.
DIN14 Base + DIN14 Shell Shroud Long + DIN14 Grip long is an optimal set for 3D printing.
There is also a "pinholder" thing, which is what its name says - it is a tool that makes it easier to push the pins into the pin base.
I've added a shrouded shell version, and a version with a longer joint between shell and grip.
The "shroud" and "grip" bodies height are a compromise between rigidity and ability to print multiple parts at once on Ender-3 in "one at a time" mode, which limits the height of the element to ~28 mm (gantry
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
