Thingiverse
Dinner Plate
by Petal3D
133
Downloads
123
Likes
1
Makes
Make your own dinner plate. You may print either a standard flat plate or one that is slightly bent. Paint and/or decorate to reflect your personality.
Print with at least 20% infill and supports. If required, scale and/or section to fit the model to your printer.
The default orientation will provide a safe print option, but using much support material and having a longer print time.
For the least amount of support material used and fastest printing time, rotate the plate so that it is standing on its edge. The problem here is that the print can have a tendency to come loose from the print bed because of a large lever moment.
The models were created in ViaCAD. ZBrush was used to remesh the parts.
2023-06-01 NOTE:
If you want to print the plate at a smaller scale, then consider increasing the thickness to keep the model printable. I printed some plates at XY scale = 25% and Z scale = 50%. This does not overly change the design concept of the part.
Print with at least 20% infill and supports. If required, scale and/or section to fit the model to your printer.
The default orientation will provide a safe print option, but using much support material and having a longer print time.
For the least amount of support material used and fastest printing time, rotate the plate so that it is standing on its edge. The problem here is that the print can have a tendency to come loose from the print bed because of a large lever moment.
The models were created in ViaCAD. ZBrush was used to remesh the parts.
2023-06-01 NOTE:
If you want to print the plate at a smaller scale, then consider increasing the thickness to keep the model printable. I printed some plates at XY scale = 25% and Z scale = 50%. This does not overly change the design concept of the part.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
