Direct Extruder Ender-6

ENGLISH:
I wanted for higher accuracy the extruder directly above the print head without much effort. I also wanted to replace the cable hose with a drag chain.
Necessary for this:
Longer cables for the stepper motor,
A drag chain (see photos),
Teflon hose (possibly use existing hose),
PC4-M6 at the receptacle for the Teflon hose.

PLEASE use my other upgrades to accommodate the drag chain at the other end (above the electronics).
Also to be able to attach the Teflon hose where the extruder used to be.

The hole in the middle is to better fix the conversion SHOULD it be necessary. For this, a thread would have to be cut into the mounting plate.
CURRENTLY, no further PC4-M6 is planned on the conversion. The filament should only be pulled; this relieves the extruder.

GERMAN:
Ich wollte für höhere Genauigkeit den Extruder direkt über dem Druckkopf ohne viel Aufwand. Auch den Kabelschlauch wollte ich durch eine Schleppkette ersetzen.
Notwendig hierfür:
Längere Kabel für