Dirty Dancing B&W Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 161x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 2 unique filamentsSwap Instructions: Start with CharcoalBorder Only Colors from here until the end. At layer #12 (1.04mm) swap to Ivory White for the rest.