Thingiverse
Discipad Switchplate
von MrPliskin
3
Downloads
6
Likes
0
Makes
This is a plate for the CoseyFanitutti's discipad number pad.
STL is 1.5mm thick and fits cherry switches perfectly - this is just an extrusion of the SVG, so can be extended in the Z direction without issue. SVG is set up for lasercutter, so traces are quite thin.
Only caveat is that corner radius doesn't quite match that of the PCB.
I've printed with 0.2mm nozzle and fine details are preserved. 0.4mm nozzle loses the 'T' on the stabs. Laser cutting usually sees the 'T's deformed.
White is printed with 0.2mm nozzle, black is printed with 0.4mm nozzle. Acrylic is 3mm lasercut.
STL is 1.5mm thick and fits cherry switches perfectly - this is just an extrusion of the SVG, so can be extended in the Z direction without issue. SVG is set up for lasercutter, so traces are quite thin.
Only caveat is that corner radius doesn't quite match that of the PCB.
I've printed with 0.2mm nozzle and fine details are preserved. 0.4mm nozzle loses the 'T' on the stabs. Laser cutting usually sees the 'T's deformed.
White is printed with 0.2mm nozzle, black is printed with 0.4mm nozzle. Acrylic is 3mm lasercut.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
