DiscoIcosahedron

This is my attempt to create some party lights. As you can see on this short i printed everything without supports, it wasn't perfect, and i used file to prepare icosahedron for press fitting diffusers. It uses Wemos D1 Mini WiFi module and 20 neopixels powered by WLED software. It requiers 5V power supply, any phone charger will be enough. You need basic soldering skill to assemble. BOMWemos D1 Mini aliexpress.com/item/1005006018009983.html (I used USB-C version)20 Neopixels aliexpress.com/item/1005001977180178.html (if you want to use this project as a simple lamp, isuggest using RGBW neopixels. They have separate white diode and much better white light)2m of 3pin wire aliexpress.com/item/1005006415649283.html (22 AWG will be plenty)USB-C cablePhone charger1 M3 8mm screw1 M3 nut1 small zip tieAssemblyCut the wire into 20 10 cm lengthsSolder neopixels in chain (red +, green data, white gnd), pay attention to the orientation, solder according to the arrows on th