Dishwasher Rack

Dishwasher Rack (150x65x5mm)I needed some more space in the dishwasher to place some cutlery or other objects, so I came up with this small dishwasher rack. The hooks take the rack-part in a slight angle to prevent the objects from falling into the dishwasher. There are three types of objects - each on their own plate:The rack that will hold the objects. If you need different sizes, let me know. The hooks to mount the rack to the dishwasher rail. You'll need at least two, better three.The pins to hold the rack part and the hooks together. You'll need the same amount as hooks. They have a tight fit, so you might need a bit of force to insert them. The hooks have a tiny hole at the bottom to push the pins out (if needed - untested).Disclaimer: My dishwasher has a 50°C “eco” mode, but I still experienced some slight warping with my cheap Geeetech PETG. I do not recommend printing it in PLA, as it will definitely warp with even lower temperatures. Thus, I recommend printing this mo