Dishwasher status indicator

This was designed for my workplace since we had cases where dirty and clean dishes were mixed up. I used 1cm cube magnets, but I made variation which has option for 25x15x5 magnet which bambu sells. AssemblyGlue is not necessary, but I highly recommend to prevent undesired disassembly. Using glue will improve turning and enables satisfying click sound. Step 1Insert 5x1 round magnets to turning plate. Using pliers will help since fit is tight. All magnets should have same orientation!Use magnets to verify orientation! Step 2Insert 5x3 magnets to base. Check orientation! These magnets should be attracted to turning plate. Step 3Insert status labels to rotator plate. Using glue is recommended for better rotation and noise reduction. Order does not matter. Step 4Insert 1cm cube magnets to base or if you printed bambu edition then 25x15x5 magnet. Glue is recommended. Step 5Insert rotator table to base and add cover.NOTE! Cover has small pin to prevent it to be inserted wr