Display Brackets for (E-)ATX Mainboards

This is a set of brackets to display your old motherboard. Makes for a great optic feature in your room.

Will fit normal ATX-Boards, but please check, that the screwholes (lowest to middle one) are 124mm apart. If that is the case, the brackets will fit. The standoffs should be big enough to clear every solder joint on the backside, if not, you can just make them longer in your slicer.

Will probably also fit E-ATX and Mini-ATX, but please check the measurement.

The motherboard shouldnt be too topheavy (depending on size), or it will risk tipping over, I am thinking about making the legs longer, to give some more stability.

Printing time with my modded Ender 3 is about 2hrs 40minutes.

You also need 4 M3 screws. I used M3x20, 8 M3 washers and 4 M3 nuts.
M4 is probably the better fit, but I designed it to be M3, maybe I'll change it in a future version. It doesnt make a difference, but my autistic brain wants it PROPER MATE.
The holes are 4mm, so M4 can probably fit just